Während das färben ihre neue treppe verbessert die schönheit der holzmaserung, müssen sie noch schutz vor dem schweren fußgängerverkehr, den sie ertragen werden. Viele hausbesitzer verwenden dafür polyurethan, das nicht nur schützt, sondern dem holz auch einen glänzenden glanz verleiht, der die reinigung zum kinderspiel macht. Das auftragen von polyurethan auf neue treppen kann...
In Diesem Artikel:
Polyurethan gibt Ihrer neuen Treppe eine harte Barriere gegen Flecken und Schäden durch den Verkehr.
Während das Färben Ihre neue Treppe verbessert die Schönheit der Holzmaserung, müssen sie noch Schutz vor dem schweren Fußgängerverkehr, den sie ertragen werden. Viele Hausbesitzer verwenden dafür Polyurethan, das nicht nur schützt, sondern dem Holz auch einen glänzenden Glanz verleiht, der die Reinigung zum Kinderspiel macht. Das Auftragen von Polyurethan auf neue Treppen kann schwierig sein, wenn Sie während des Trocknens die Treppe benutzen müssen, aber Sie können das umgehen, indem Sie nur jeden zweiten Schritt auf einmal beschichten.
1
Sande jede Stufe mit Schleifpapier mit 120 Körnungen, so dass die Oberfläche flach und glatt ist. Saugen Sie den Staub ab und wischen Sie jeden Schritt mit einem Hefttuch ab.
2
Wenden Sie die Dose aus Polyurethan vorsichtig etwa 10 Mal vor Gebrauch an und wiederholen Sie dies regelmäßig während der Arbeit. Schütteln Sie nicht die Dose. Dies wird Blasen in Ihrem Finish verursachen.
3
Tragen Sie Polyurethan in einer dünnen, gleichmäßigen Schicht auf der oberen Stufe auf. Verwenden Sie dazu einen Lammwolle-Applikator oder einen Pinsel, der für die Verwendung mit Ölfarben gekennzeichnet ist.
4
Pflegen Sie eine nasse Kante, indem Sie jeden Strich überlappen. Dies hilft, Scheitelmarken zu vermeiden.
5
Markieren Sie den nächsten Schritt mit einem Malerband, wenn Sie beim Trocknen des Polyurethans auf die Stufen gehen müssen. Mache diesen Schritt nicht.
6
Tragen Sie Polyurethan auf die nächste Stufe auf und malen Sie jeden zweiten Schritt weiter und markieren Sie die unlackierten Stufen. Wenn Sie die Treppe nicht benutzen müssen, tragen Sie bei jedem Schritt Polyurethan auf.
7
Lassen Sie die Treppe zwei bis zwölf Stunden trocknen oder die auf dem Etikett des Herstellers empfohlene Zeit.
8
Sand das getrocknete Polyurethan mit 220-Korn-Sandpapier, um den Glanz zu trüben.
9
Tragen Sie eine zweite Schicht auf jede Stufe auf. Lassen Sie die zweite Schicht trocknen und schleifen Sie sie dann mit 220-Schleifpapier, um den Glanz wieder zu glätten.
10
Auf jeden Schritt eine letzte Schicht auftragen und 24 Stunden trocknen lassen. Schleifen Sie die letzte Schicht Polyurethan nicht ab.
11
Entfernen Sie das Klebeband auf den unbeschichteten Stufen, nachdem die Farbe getrocknet ist. Malen Sie jede dieser Schichten mit drei Schichten Polyurethan und schleifen Sie zwischen den Schichten wie bei den vorherigen Schritten.
12
Warten Sie 24 Stunden, bevor Sie auf die Treppe gehen und vermeiden Sie, Teppiche, Putzmittel oder die Treppe für eine Woche starkem Verkehr zu unterziehen. Polyurethan braucht etwa 30 Tage, um vollständig zu härten.
Dinge, die du brauchst
- Schleifpapier mit 120 Körnungen
- Vakuum
- Tack Tuch
- Lammwolle Applikator
- Pinsel
- Malerband
- 220-Schleifpapier
- Lumpen
Spitze
- Lassen Sie die Polyurethan-Zeit auf Ölbasis sich vor der Anwendung an die Raumtemperatur anpassen. Dies erleichtert das Auftragen des Polyurethans und verhindert das Auftreten von Blasen.
FAQ - 💬
❓ When can you walk on stairs after polyurethane?
👉 Wait 24 hours before walking on the stairs and avoid using rugs, cleaners or subjecting the stairs to heavy traffic for about one week. Polyurethane takes about 30 days to fully cure.
❓ Should I polyurethane my stairs?
👉 Because stairs are high traffic parts of your home, you must ensure your stairs are well protected from stains, water, scuffs, and scratches by applying three coats of polyurethane to the treads, making sure to lightly sand between each coat for good adhesion between each layer.
❓ How many coats of polyurethane should you put on stairs?
👉 Depending on the type of wood and condition of the stairs, usually two or three coats of oil-based polyurethane are enough. However, you need to be aware that it takes longer to dry. Also, it can add an amber glow to the wood, making it susceptible to brush marks.
❓ How many coats of polyurethane do I need for oak stairs?
👉 For ideal results, you should use about three or four coats. You will also have to wait quite some time between coats, as this polyurethane takes longer to dry. No matter how many coats of polyurethane you apply, it will always be quite a time-consuming process when using an oil-based finish.
❓ Can you sleep in house after polyurethane?
👉 We recommend a minimum of 2 days of socks-only traffic for floors finished with oil polyurethane. The house is not inhabitable for a minimum of 2 days after the job is completed, and better to stay out for at least 5 as the fumes/off-gassing is not advisable to breathe in, even if there are other rooms to sleep in.
❓ How long are polyurethane fumes toxic?
👉 How long are polyurethane fumes toxic? The toxic smell of polyurethane takes about five to seven days to decrease. However, you'll still notice a bit of the odor here and there for about three weeks in the case of water-based polyurethane and four weeks for oil-based poly.
❓ What is best finish for wood stairs?
👉 Polyurethane is the best surface finish for stairs....Some examples are shellac, lacquer, and varnish.
- Shellac adds a warm amber finish to wood but can be damaged or react to heat or chemicals. ...
- Varnish is most useful for exterior wood. ...
- Lacquer creates a smooth, glossy finish.
❓ Is two coats of polyurethane enough?
👉 For best results, apply at least two coats of polyurethane. When working on floors, tables, chairs, and furniture that will be used often, apply at least three coats. If you are using water-based polyurethane, you can apply up to four or five coats on floors and sheds.
❓ What happens if I don't sand between coats of polyurethane?
👉 For some types of poly, nothing happens if you don't sand between coats of polyurethane. However, most polyurethane will not adhere properly if you skip sanding dust nibs and brush marks on the finish. The polyurethane finish will eventually peel off or become deformed.
❓ How long should I wait to apply a second coat of polyurethane?
👉 You should typically wait about 2 hours between coats of water-based polyurethanes and about 8 hours between coats of oil-based polyurethane before applying additional coats.
❓ Is two coats of polyurethane enough on stairs?
👉 Stairs are high-traffic areas, so you should apply at least 3 coats of polyurethane. The same is true for water-based and oil-based poly alike. If you applied a sealer coat, you may only need two coats of water-based polyurethane., but as always, keep going until you get a smooth finish.
❓ How do you apply polyurethane to new stairs?
👉 Applying polyurethane to new stairs can be tricky if you have to use the stairs while the finish is drying, but you can get around this by coating only every other step at one time. Sand each stair with 120-grit sandpaper so that the surface is flat and smooth.
❓ How long does it take for polyurethane to cure on stairs?
👉 Wait 24 hours before walking on the stairs and avoid using rugs, cleaners or subjecting the stairs to heavy traffic for about one week. Polyurethane takes about 30 days to fully cure. Allow oil-based polyurethane time to acclimate to the room’s temperature before applying.
❓ How do you apply polyurethane to wood with mineral spirits?
👉 Combine two parts polyurethane with one part mineral spirits in the new container. Brush or wipe a single coat of this mixture onto the wood. Wait for it to dry before proceeding. Pure polyurethane takes roughly 24 hours to dry, but it should take less than that when diluted with mineral spirits. [11] Sand the wood again.
❓ How long does it take for polyurethane to dry?
👉 If you don’t have to use the stairs, apply polyurethane to every step. Leave the stairs to dry for two to 12 hours, or the time recommended on the manufacturer’s label. Sand the dried polyurethane with 220-grit sandpaper to dull the sheen.